The Advanced Security Module/ASM (formerly referred to as an Exterior Door Kit or EDK) has two status LEDs.
Power LED:
Located on the side towards the Schlage RC’s pigtail.
A red LED indicates 12VDC power is being supplied to the ASM.
Communication Status LED:
Located on the side towards the lock wiring.
LED status meanings are described in the table below.
| Schlage RC Locked | Schlage RC Unlocked | Lock State when Schlage RC is Unlocked | Description or Item to Check |
|---|---|---|---|
| OFF | GREEN | Normal Operation | |
| Flash Amber | Flash Amber | No Operation | Yellow wire may be disconnected. |
| OFF | Flash Amber | No Operation | White wire may be disconnected. |
| OFF | Flash Amber | No Operation | Invalid encryption key received from Schlage Reader-Controller. |
| OFF | OFF | No Operation | If power cycle of Schlage Reader-Controller allows for one or more lock operations, and then the lock stops operating, then the BackEMF diode may not be installed correctly. |