IP Bridge
Product Information
Device Information and Settings
Device Information | IP Bridge |
|---|---|
Overview | The IP Bridge 2.0 connects the modern IP-network world and legacy Wiegand installations. Simply unplug existing panels and attach Wiegand readers directly to the IP Bridge 2.0. |
Submodels | IPBV2 |
Applications | Perimeter Exits, Amenity Spaces, Common areas |
Operating Mode | Online / Real time |
Supports ResKey NFC Credentials | With an MTB is connected and has been commissioned using the Zentra mobile app |
Support Zentra BLE Credentials | With an MTB is connected and has been commissioned using the Zentra mobile app |
Number of Users Supported | 100 |
Setting | Description | Contingencies | Options (Default) |
|---|---|---|---|
Door Sense (DPS: Door position sensor) | Senses whether the door is open or closed. | Physical DPS must be installed. | On: monitor the door status (Off) : do not monitor the door status |
Latch | Set to match whether a physical latch is present or not. | Physical latch must be installed. | (On) : Latch is installed Off: Latch is not installed |
Latch Interval (Relock delay) | Number of seconds before the latch relocks after unlocking. | Latch must beOn . | 1-30 seconds (3) |
REX (Request for Exit) | Request to Exit output to strike/maglock. | REX device must be physically present. | On: REX output will be triggered (Off) : REX output will not be triggered |
REX Input Type | Set to match the normal state of the door. | REX must beOn . | (Normally closed) : door is normally closed Normally open: door is normally open |
AUX (Auxiliary Input) | Toggle on to use AUX output. Used to trigger additional events when credential is read. | AUX device must be physically present. | On: AUX output will be triggered (Off) : AUX output will not be triggered |
AUX Input Type | Set to match the normal state of the door. | AUX Must beOn . | (Normally closed) : door is normally closed Normally open: door is normally open |
Beeper | Toggle whether the beeper should sound or not | (On) : the lock beeper will sound. Off: the lock beeper will not sound. | |
Beeper Sounds | Indicate which event should cause the lock beeper to sound. | Beeper must beOn . | (Event) : beeper will sound for each event Tamper Event: beeper will sound for tamper events |
Lock On Close | Toggle whether the door should lock when it is closed or not. | Door Sense must beOn . | On: lock will automatically move to locked state when closed (Off) : lock will not automatically move to locked state when closed |
Additional Topics