Create Schlage Access Point

This is the process to add Schlage devices to the Zentra software using the web app. This process applies to Control, RC, NDE, LE and XE360. In order to finish adding these devices to Zentra, they must be commissioned using the mobile app. These devices/access points can be set up on the web app before finishing installation on the property to ensure that access rights and device settings are configured properly and applied during commissioning using the mobile app.

1. Navigate to Devices.
   
2. Hover over the .
3. Choose Create Schlage Access Point.
   
4. Enter the following into the fields:
   • Access Point Name: a meaningful name for the device
   • Device Type
   • Device Usage: Helps Zentra know which doors to prioritize when adding programming credentials for No-Tour Sync. This section doesn’t impact device settings or functionality.
5. Click Create.
   
6. The new device will be added to the list on the Devices page.

*The device must still be commissioned using the Zentra Mobile App.

Additional information

When a new access point is created, two other items are created automatically:

• A User group named the same as the access point
• A Schedule that is a Weekly Rule named the same as the access point
  

The new user group will have the new schedule automatically assigned to it. This makes a simple way to add new users to access points, and grant access, quickly. These automatically created groups and schedules cannot be deleted as usual, but they will be removed automatically when the access point is removed.