Global Settings are settings that will populate throughout the system, to all Devices. Recommended best practice is to set these settings before adding or enrolling any Devices.
| Setting | Description |
|---|---|
| Default PIN Length | Controls how many digits long a PIN is, by default. If you create a new Keypad Entry credential for a User, the Pin Length box will default to this setting. You can change the length at the time you create the credential. If credentials were already created when you changed this setting, the credentials will maintain validity. |
| Re-lock Time | Controls the default time of day that Devices will relock if still unlocked. |
| Timezone | Controls the time zone that the system will follow. |
| ADA Relock Delay | This is the number of seconds a lock will stay unlocked after a valid mobile credential was presented, when ADA Relock Delay is enabled for the credential. |
| Manage Schlage Control Access Configuration | By turning this feature off, you will be responsible for managing the access configuration for the Schlage Control lock. The default 24×7 grant access schedule associated with the user group that shares a name with a lock will no longer be created and maintained automatically. Once the feature is turned off, it cannot be turned back on for existing Schlage Control locks. |
| Two-Factor Authentication | Enable for enhanced security. |
| Access Point Encryption | Enabling encryption modify the behavior on the ISONAS IPBridge 2.0. The ISONAS Config Tool must be used to enable encryption on all reader controllers if this setting is enabled. Once this setting had been modified, when connected devices attempt to refresh, they will not be able to reconnect to Zentra until the local device setting is modified. |
| Available Credential Formats | Choose all credential formats that will be used in the site. |
| Default Credential Format | Choose the default credential format for the site. |
Copyright © 2025 Zentra
—
Powered by 