LE - Zentra Product Manual - 1

Product Information

Device Information and Settings

Device Information	LE Series
Overview	The LE is a mortise lock that is designed to affordably extend electronic access control deeper into the building beyond traditional perimeter and high security openings and offers users the security and convenience of using a smart device to gain access.
Submodels	Cylindrical	LE/LEB Family
	Mortise	LEMS/LEBMS
	Mortise with an internal push button	LEMB/LEBMB
	Deadbolt	LEMD/LEBMD
Applications	Resident Units, Perimeter Exits, Amenity Spaces, Common Area
Operating Mode	Wireless
Supports ResKey NFC Credentials	Yes
Support Zentra BLE Credentials	LEB Family Only
Number of Users Supported	5,000
Number of Audits supported	2,000

Setting	Description	Contingencies	Options (Default)
First Person In	Guarantees that at least one person is present when the door is open.	Works with AutoUnlock Schedules.	On: lock will remain locked until a user presents a credential to open the door. The lock will then stay unlocked until the end of the AutoUnlock period. (Off): lock will unlock at the set unlock time.
Door Sense (DPS: Door position sensor)	Senses whether the door is open or closed.	Physical DPS must be installed.	On: monitor the door status (Off): do not monitor the door status
Door Prop Delay	The amount of time before a door prop event is generated.	Door Sense must be On. Door Prop Enabled must be On.	1-255 seconds (20)
Latch Interval (Relock delay)	Number of seconds before the latch relocks after unlocking.	Latch must be On.	1-30 seconds (3)
Fail Modes	Defines what the device should do when entering Critical Battery Mode. Fail Safe should be used when free egress is necessary. Fail Secure should be used for high security applications.	Automatically set to Fail Secure if ASM is enabled, and cannot be changed.	(Fail Safe): device will move to unlocked state during power failure Fail Secure: device will move to locked state during power failure
Proximity RF	Toggle whether proximity credentials will be read or not.		(On): Proximity credentials will be read Off: Proximity credentials will not be read
Beeper	Toggle whether the beeper should sound or not		(On): the lock beeper will sound. Off: the lock beeper will not sound.
Beeper Sounds	Indicate which event should cause the lock beeper to sound.	Beeper must be On.	(Event): beeper will sound for each event Tamper Event: beeper will sound for tamper events
Reader Sensitivity			(Normal) High Max
Daily Schedule/Weekly Schedule	Use this to configure the check-in frequency*. You can use a daily schedule and have the device check in anywhere from every 1 hour to every 24 hours. You can use a weekly schedule and only have the device check in at specific times on specific days of the week.		(Daily) Weekly
Check In Frequency	How often the check-in should occur.	Daily Schedule must be selected.	Every 1 hour Every 2 hours Every 4 hours Every 8 hours Every 12 hours (Every 24 hours)
Check In Time	The specific time the check-in should occur.	Daily Schedule must be selected.	(The current time)
Day of the Week	The day of the week the check-in should occur.	Weekly Schedule must be selected	(none)
Check in Time (for each day)	The specific time the check-in should occur.	Weekly Schedule must be selected	(The current time)
Next Projected Check In	The next time the check-in is expected to occur.
Last Connect time	The last time the device connected to the server.