IP Bridge - Zentra Product Manual - 1

Product Information

ISONAS IP Bridge

Device Information and Settings

Device Information	IP Bridge
Overview	The IP Bridge 2.0 connects the modern IP-network world and legacy Wiegand installations. Simply unplug existing panels and attach Wiegand readers directly to the IP Bridge 2.0.
Submodels	IPBV2
Applications	Perimeter Exits, Amenity Spaces, Common areas
Operating Mode	Online / Real time
Supports ResKey NFC Credentials	With an MTB is connected and has been commissioned using the Zentra mobile app
Support Zentra BLE Credentials	With an MTB is connected and has been commissioned using the Zentra mobile app
Number of Users Supported	100

Setting	Description	Contingencies	Options (Default)
Door Sense (DPS: Door position sensor)	Senses whether the door is open or closed.	Physical DPS must be installed.	On: monitor the door status (Off): do not monitor the door status
Latch	Set to match whether a physical latch is present or not.	Physical latch must be installed.	(On): Latch is installed Off: Latch is not installed
Latch Interval (Relock delay)	Number of seconds before the latch relocks after unlocking.	Latch must be On.	1-30 seconds (3)
REX (Request for Exit)	Request to Exit output to strike/maglock.	REX device must be physically present.	On: REX output will be triggered (Off): REX output will not be triggered
REX Input Type	Set to match the normal state of the door.	REX must be On.	(Normally closed): door is normally closed Normally open: door is normally open
AUX (Auxiliary Input)	Toggle on to use AUX output. Used to trigger additional events when credential is read.	AUX device must be physically present.	On: AUX output will be triggered (Off): AUX output will not be triggered
AUX Input Type	Set to match the normal state of the door.	AUX Must be On.	(Normally closed): door is normally closed Normally open: door is normally open
Beeper	Toggle whether the beeper should sound or not		(On): the lock beeper will sound. Off: the lock beeper will not sound.
Beeper Sounds	Indicate which event should cause the lock beeper to sound.	Beeper must be On.	(Event): beeper will sound for each event Tamper Event: beeper will sound for tamper events
Lock On Close	Toggle whether the door should lock when it is closed or not.	Door Sense must be On.	On: lock will automatically move to locked state when closed (Off): lock will not automatically move to locked state when closed

Additional Topics

See IP-Bridge Status Light Indicators.